Washing in the bathroom or shower isan integral part of the life of a civilized person. But almost every person who has his own house already has or wants to build a bathhouse. Construction of the bath with their own hands is quite possible. For this it is necessary to have certain skills in carpentry. Build baths from logs, and you can use it to build a sauna beam. The smell of natural wood is the basis of vitality and good health. A bath from a bar can be built by one's own hands, but knowledge of the construction device and special methods of building a bathhouse is required.
Soil of the site, got for constructionown home, may not always be good for this purpose. But even in such a place a bathhouse can be built from the bar with their own hands. When the soil is wet and loose, it is possible to arrange a screw foundation. Moreover, its device does not require special experience. The number of screw piles is determined by the weight of the structure. The distance between the piles that will support the frame from the timber, should be 2 m. Based on the size of the perimeter of the basement, it is easy to calculate the number of piles. In order to screw a screw pile into the ground, it will take two or three people to work. The screwed piles are fixed with a common head, which is made in the form of a solid plate or welded structure made of metal channels or corners. You can mount such a foundation at any time of the year. It will cost less than tape or columnar construction. To ensure that the bath of the bar with its own hands was built qualitatively, the first crown is made of thickened logs impregnated with antiseptic solution, the underside of which must be covered with a layer of mastic for waterproofing. The corners of the crown must be carried out by the connection "in the bowl" to better protect the bath from wind and moisture.
The walls are erected from a bar with a section of 15x15 or15x18 cm by joining into the end tongue. For the warming of walls from a bar it is better to use a jute rope, it has a more aesthetic appearance. The floor in the washing is made of concrete. A separate foundation is arranged for the stove. In the center of the washing place for a drain hole.
An absorbing pit is excavated. If the soil is sandy, then the pit is excavated directly in the center of the room, if clay, then the pit is moved out of the building. The concrete floor must have a slope from all sides to the drain hole. The floor is laid with a layer of insulation, the connection places of the floor and walls are also filled with bitumen. Then the wooden floor is arranged. Places where the wooden floor connects to the walls are also waterproofed with bitumen.The roof can be single-pitched, but it is preferablegable or four-slope version with an attic, which holds well the heat. The installed rafters are connected by metal or wooden puff. Then, either a crate is made, if the roof is made of slate or tile, or a solid board is laid, if the roof is a roll. The entire roof is covered with the selected roofing material. Then the ceiling is arranged. A fire-resistant filling is laid around the stove. On the ceiling is laid a layer of vapor barrier and insulation. The walls inside are lined with a board, shelves are set up, a stove is installed or laid out, a waiting room is set up. The bath of the bar, built by oneself, is quite an advantageous option, since you do not have to pay for someone else's work, and everything will be done according to your will and understanding.